Maintenance and cleaning of stainless steel padlock
With the development and progress of society, people have higher and higher requirements for the quality of life.The maintenance of this kind of product is also paid more and more attention. Among them, how to properly maintain and clean some common life gadgets such as stainless steel padlocks is also a very important aspect.
I. Daily maintenance
1. Prevent collision or impact: During use, try to avoid strong collision or impact, so as not to cause the lock body to deform and affect the normal use.
2. Don't disassemble the parts at will: If there is a fault, don't disassemble and repair it yourself at will. It's best to send it to a professional repair shop and have it handled by professionals. Self-disassembly may damage the internal structure, destroy the original sealing performance and reduce the service life.
3. Keep it dry: place it in a ventilated place to prevent moisture from invading, and at the same time, apply a thin layer of antirust oil to increase the protection effect; In addition, storage in humid environment for too long will make the metal surface oxidized and discolored or even rusted.
Second, regular inspection
1. Check whether the locking tongue can rotate flexibly;
2. Wipe the lock surface regularly with a soft cloth to remove dust and dirt, so as to keep the appearance clean and bright;
3. If a foreign body is found blocking the keyhole, it should be cleaned up in time;
4. Locks that have not been used for a long time should be opened before being locked again, and can be left idle for a long time after being confirmed to be normal.
Third, correct cleaning
1. Preparation before cleaning:
(1) Prepare clean gloves and towels without water stains;
(2) A neutral detergent is added with warm water to prepare a solution as a cleaning solution.
2. The steps are as follows:
(1) Put on gloves and soak the lock in cleaning solution for about ten minutes;
(2) Use a soft brush to gently remove dirt;
(3) Finally, rinse with flowing clean water.
Precautions: Never use hard objects such as steel balls and frosted paper to scratch to avoid damaging the surface gloss!
The above is the introduction of the maintenance and cleaning methods of stainless steel padlocks, hoping to help you!
Rec. Prods.
Tags:
Addresses:https://www.tepinji.com/Machi/3906.html